Moisture problems in new-build homes
In any building, moisture can occur at some point. In many cases, this remains almost harmless, such as the occurrence of condensation moisture after showering. However, over time, even seemingly minor moisture problems can cause damage. Read all about moisture problems in new-build homes here.
Quickly find your answer:
Free diagnosis
A thorough moisture analysis is crucial to accurately identify various moisture problems. This is an essential first step in determining the most appropriate solution. Are you in need of such an analysis? Our specialists are ready to support you free of charge and without obligation.
What moisture problems in new-build homes?
Different types of moisture problems the head in a new-build home. We list some common causes of damp problems in a new building.
Building moisture
Moisture problems in new-build homes are often caused by building moisture. Building materials such as cement and concrete require a lot of water during production. In addition, weather conditions during the works can also cause additional moisture. After construction, it is essential that these materials are given sufficient time to dry out properly before the property is occupied. Adequate ventilation is also required. However, we often find that this is not always respected in practice, which can result in increased humidity or moisture stains. So wait a sufficient amount of time and ventilate your newly built home thoroughly before finishing your walls and floors and moving in, otherwise you will suffer from moisture problems in the long run.
Condensation moisture
In humid rooms such as kitchens and bathrooms, humidity rises quickly. When you cook or take a bath, a large amount of water vapour enters the air, which will then deposit on cold surfaces, such as the walls and ceiling. The resulting water droplets are harmless at first. However, it becomes a problem when the humidity is too high for a long period of time and the water vapour cannot escape. This type of condensation problems is often caused by mistakes in construction or faulty insulation installation.
Rising damp
Rising damp occurs when walls absorb soil moisture or excess rainwater. This phenomenon is often caused by high groundwater levels and can be exacerbated by problems with the flood defence. Failure to do so when renovating the waterproofing is one of the most common construction mistakes that lead to this moisture problem. Allowing plaster to reach the ground can also contribute to rising damp.
Consequences of moisture problems in new buildings
Moisture problems in a new building have adverse effects on both the liveability and the value of the new home:
The longer symptoms are ignored, the more difficult and expensive treatment becomes. So it is essential to address moisture problems early, even if they only occur in winter.
Tackling moisture problems in your new home
Just as there are different causes for moisture problems, there are also different moisture solutions that can remedy moisture problems. Some examples are:
The best solution to deploy depends very much on the cause and extent of the moisture problem. Make sure you call on the expertise of a moisture expert, as this ensures the right choice and correct application of moisture control methods.
Have you noticed a moisture problem in your new build? Or are you planning to purchase a new-build home? Then we understand that you want to do everything possible to avoid moisture problems. Have your property inspect on possible moisture problems. That way, any problems are quickly spotted and an appropriate solution can be provided. So you can enjoy your new home without any worries. Feel free to contact with us for a moisture analysis.
More information and brochure request
Answer the questions below and get more information and our brochure based on them.
